Escrito originalmente por Guest JoséR en 18 de Diciembre del 2008
Hola, quería preguntaros si es posible poner la recta del RMS (que tengo) como Pit lane, partiéndola en dos longitudinalmente y activando la función (si la tiene disponilble) algún programa de gestión de carreras tipo PCLC. Yo creo que sí se podrá pero como estoy esperando a que me llegue mi PB Pro (y el cable de RichG) y no puedo probarlo es para hacerme mis "flipadas mentales" mientras me llega.
No se si me explicado muy bien.
Lo dicho, se podrá?
Puede servir de Pit Lane?
- HAL
- Site Admin
- Mensajes: 175819
- Registrado: Lun Sep 02, 2019 5:33 am
- HAL
- Site Admin
- Mensajes: 175819
- Registrado: Lun Sep 02, 2019 5:33 am
Escrito originalmente por RikoRocket en 18 de Diciembre del 2008
Hola,
Google translator is not very good.
Did you ask can you use the old RMS straight to detect pit in and out? If so the answer is no. You have to identify the car ID as well. The only way is to use an old 6 car PB modified as this link
Sorry if I have misunderstood.
Riko
Hola,
Google translator is not very good.
Did you ask can you use the old RMS straight to detect pit in and out? If so the answer is no. You have to identify the car ID as well. The only way is to use an old 6 car PB modified as this link
Sorry if I have misunderstood.
Riko
- HAL
- Site Admin
- Mensajes: 175819
- Registrado: Lun Sep 02, 2019 5:33 am
Escrito originalmente por Guest JoséR en 18 de Diciembre del 2008
Oh it's true! I forget that the car must be identify by the PB. What a mistake! Sorry for the question. What about the new pit lane? Will work with PCLC?
Thanks Riko
Oh it's true! I forget that the car must be identify by the PB. What a mistake! Sorry for the question. What about the new pit lane? Will work with PCLC?
Thanks Riko
- HAL
- Site Admin
- Mensajes: 175819
- Registrado: Lun Sep 02, 2019 5:33 am
Escrito originalmente por RikoRocket en 18 de Diciembre del 2008
I have not yet seen one. I would need to disassemble one to look at the possibilities. Standard unit, the answer is almost certainly no...
I have not yet seen one. I would need to disassemble one to look at the possibilities. Standard unit, the answer is almost certainly no...